Two ironworkers in hard hats and fall-protection harnesses on a steel deck above the San Francisco skyline and Bay Bridge

Structural Steel & Miscellaneous Metals · San Francisco Bay Area

One subcontract from shop drawings to punch list.

We detail it, we furnish it, and our own ironworkers set it. One agreement, one project manager, one party accountable for the steel package.

  • CSLB #1145854Class C-51 Structural Steel
  • DIR #2000025250Registered for Public Works
  • Local 378Ironworkers
  • Union & Open ShopPriced Both Ways on Request
  • NAICS 238120Structural Steel Erection

01 — Scope of Work

What we bid.

Divisions 05 12 00 and 05 50 00. If your steel package has a line on it that isn't below, send the drawings anyway and we'll tell you straight whether it's ours.

Structural Steel

Division 05 12 00

  • Columns, beams, and braced frames
  • Base plates, embeds, and anchor bolts
  • Canopy, awning, and entry framing
  • Storefront and infill steel
  • Rooftop framing and equipment supports
  • Dunnage and screen-wall framing
  • Metal deck and accessories

Miscellaneous Metals

Division 05 50 00

  • Steel and metal-pan stairs and landings
  • Guardrail, handrail, and cable rail
  • Ladders, roof access, and fall anchors
  • Hoistway steel and Cal/OSHA screening
  • Trash-enclosure roofs, gates, bollards
  • Lintels, angle frames, and pit frames
  • Garage, bike, and equipment fencing

Field & Engineering

Steel Erection & Support

  • Steel erection, bolt-up, and field welding
  • Crane coordination and lift planning
  • Connection design by licensed PE
  • Shop and erection drawings
  • Anchor-bolt verification and layout
  • Special-inspection coordination
  • Shop primer and galvanizing

Beyond the steel package

Construction Management Project Management

Some owners and contractors want one point of accountability across the whole job. We take those assignments too. Call DiAngelo, describe the project, and he'll tell you whether we're the right fit.

Crane setting a structural steel frame

The set goes faster when the drawings were right the first time.

02 — How We Bid

Why contractors call us back.

Four things we do on every invitation, whether the job is a trash enclosure or a seven-story podium.

1

You get RFIs, not change orders.

We read the whole set while we're bidding: architectural, structural, and the specifications. Then you get a written log of every conflict and gap we found, before the bid date.

2

Bids you can actually level.

Scope broken out by system, inclusions and exclusions in writing, a schedule of values, and an itemized material list at buyout. No one-line quotes.

3

Both wage bases, same scope.

Union or open shop, priced side by side on request, so your team carries the basis the job actually requires. We're DIR-registered and report certified payroll.

4

Short fuse is fine.

Send the due date with the invitation. We confirm the same day whether we can hit it, and then we hit it. We don't hold a package past the date we committed to.

03 — Credentials

Everything your prequal packet asks for.

License, registration, coverage, and standards. Certificates and limits go out with the subcontract, or sooner if your compliance team needs them at bid time.

License
CSLB #1145854 · Class C-51 Structural Steel. Active and in good standing.
Public Works
DIR #2000025250 · Certified payroll reported per DIR requirements.
Insurance
General liability, automobile, workers' compensation, and excess liability. Certificates with additional-insured and waiver-of-subrogation endorsements issued at contract execution. Limits and carrier furnished on request.
Bonding
Payment and performance bonds available on qualifying projects. Capacity confirmed with our surety per project.
Safety
Written Injury and Illness Prevention Program, task-specific job hazard analyses, OSHA 10/30 trained supervision, certified welders and riggers, and documented fall-protection and rigging training.
Standards
AISC 303 and 360 fabrication and erection. AWS D1.1 welding by qualified welders. OSHA 1926 Subpart R.
Labor
Union and open shop. Ironworkers Local 378.
Classification
NAICS 238120 · Structural Steel and Precast Concrete Contractors. Equal Opportunity Employer.

Markets we work in

Retail & Restaurant Multifamily & Affordable Housing Modular & Factory-Built Automotive & Carwash Parking & Podium Structures Light Industrial & Warehouse Institutional & Public Works Tenant Improvement

04 — The Company

One party responsible for the steel.

Gleaves Contractors Inc. is a structural steel and miscellaneous metals contractor on Evans Avenue in San Francisco. We work as a subcontractor to general contractors on commercial, multifamily, institutional, and public works projects around the Bay Area.

We carry the package end to end on one subcontract: detailing and shop drawings, fabrication, delivery, erection, and closeout. Fabrication is produced by our fabrication partner to GCI shop drawings and under GCI's contract. You sign one agreement, work with one project manager, and hold one party responsible from approval drawings through the punch list.

We bid union and open shop, and we're DIR-registered for prevailing-wage public work. Ask, and we'll price the same scope both ways so your team can carry the basis the project actually requires.

Welder in a hood and gloves running a weld on structural steel plate

05 — Legacy

Three generations.

Before there was a license number, there was a shipyard engineer, an infantryman, and thirty years on the same streets in Bayview–Hunters Point.

James Gleaves, electrical and mechanical engineer at the Naval Shipyard
James Gleaves Electrical and mechanical engineer, Naval Shipyard. From the family archive

James Gleaves

Naval Shipyard · Pearl Harbor era

James Gleaves worked as an electrical and mechanical engineer at the Naval Shipyard during the Pearl Harbor period. Mechanical shipyard systems, power distribution, equipment reliability. The work kept wartime naval operations running, and it is where the family's engineering line starts.

Ronald Gleaves

U.S. Army Infantry · Vietnam

Ronald Gleaves served in the U.S. Army Infantry in Vietnam. He came home to Bay Area construction, made a name in it, and had a hand in forming Gleaves Contractors Inc. He is the company's Chief Financial Officer today. How he was trained is still how the work gets run here.

Dedria Smith

Bayview–Hunters Point · 30+ years

Dedria Smith has been in Bayview–Hunters Point for more than thirty years. She has been a member of the A. Philip Randolph Institute for over twenty of them, specializing in community organizing and outreach. The company's address is 1333 Evans Avenue, in that same neighborhood. She handles community outreach for GCI, and thirty years in one place is not something a company can hire for.

06 — Leadership

Who you'll be dealing with.

Small office, direct lines. The person who prices your job is the person who answers the phone about it.

DiAngelo Gleaves Chief Executive Officer 415.845.1443 DiAngelo@GleavesContractors.com
Ronald Gleaves Chief Financial Officer
Clayton West Construction Manager
Dedria Smith Community Outreach

07 — Partners

Who we work with.

Gleaves Contractors Inc. is the contracting party on every steel package. These are the firms we work alongside on the rest of it.

JBR Partners, Inc.

JBR Partners, Inc.

Gleaves Management Co., established 2018

Gleaves Management Co.Est. 2018

TopOut Consult LLC

TopOut Consult LLC

Send us your next steel package

Have a set out to bid?

Send the drawings and the due date. We'll confirm the same day whether we can hit it, and you'll have our RFI log before the bid date.

08 — Bid Invitations

Send us a bid invitation.

The more of this you fill in, the faster we come back with a number. If you'd rather just forward the ITB, email it to Info@GleavesContractors.com and we'll take it from there.

The Project
The Bid

BuildingConnected, SmartBid, Dropbox, Box, Procore, whatever your office uses. Or email the set and reference this form.

You

We confirm the same day whether we can hit your due date.